Description
FILTER FAN 150MM X 150MM 48VDC
FILTER FAN 150MM X 150MM 48 V IP 54 RAL 7035 STANDARD FLOW
FPF พัดลมฟิลเตอร์ ตู้คอนโทรล ตู้ไฟฟ้า กันน้ำ กันฝุ่น IP54 ติดตั้งง่ายไม่ต้องใช้เครื่องมือ ถอดแผ่นกรองทำความสะอาดง่าย การไหลเวียนอากาศในตู้ดี
FORCED CONVECTION
Forced ventilation is an efficient, cost-effective solution to prevent the formation of hot air pockets inside the electrical panel.
FILTER FAN PLUS VENTILATION GRID
The optimal configuration consists of a fan with filter combined with a filtering ventilation grid. The fan with filter (filter fan), installed in the lower part of the panel, injects and filters air from the room (standard airflow), while the hot air is expelled through the grid with filter positioned in the upper part. In this manner, the pressure generated by the ventilation prevents unfiltered air from seeping in through holes or cracks.
REVERSE FLOW
A reverse airflow configuration is also possible, with the filter fan installed in the upper part and ventilation grid with filter positioned in the lower part of the panel. The ventilation system can be controlled by a thermostat when high temperatures are reached.
VENTILATION WITH ROOF EXHAUST UNIT
Ventilation with roof extraction can be used when, for instance, some side walls of the electrical panel are covered by obstacles, walls or walls of other panels. In the ideal configuration, the roof exhaust unit, installed on the top of the panel, is paired with a ventilation grid with filter located at the bottom. The vacuum generated by the exhaust unit draws air from outside through the ventilation grid, allowing internal air exchange and heat disposal.
Reviews
There are no reviews yet.